linux如何無損調整分區大小
情況:
- home:500G
- root:50G
- root分區不夠用
思路:把home分區的空間劃一部分到root分區
# 設置home分區大小為200G,釋放300G空間 $ lvreduce -L 200G /dev/centos/home # 將空閑空間擴展到root分區 $ lvextend -l +100%FREE /dev/centos/root # 使用XFS文件系統自帶的命令集增加分區空間 $ xfs_growfs /dev/mapper/centos-root
實例
situation
掛載在根目錄的分區 /dev/mapper/centos-root 爆滿,占用100%
$ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/centos-root 50G 50G 19M 100% / devtmpfs 32G 0 32G 0% /dev tmpfs 32G 0 32G 0% /dev/shm tmpfs 32G 2.5G 29G 8% /run tmpfs 32G 0 32G 0% /sys/fs/cgroup /dev/mapper/centos-home 476G 33M 476G 1% /home /dev/sda1 497M 238M 259M 48% /boot tmpfs 6.3G 0 6.3G 0% /run/user/0
analyze
掛載在根目錄的分區空間太小,只有50G,而服務器 home 目錄為非常用目錄,掛在了近500G的空間。
思路:從 centos-home 分區劃出300G空間到 centos-root 分區。
operation
1.查看各分區信息
$ lvdisplay --- Logical volume --- LV Path /dev/centos/home LV Name home VG Name centos LV UUID 1fAt1E-bQsa-1HXR-MCE2-5VZ1-xzBz-iI1SLv LV Write Access read/write LV Creation host, time localhost, 2016-10-26 17:23:47 +0800 LV Status available # open 0 LV Size 475.70 GiB Current LE 121778 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Path /dev/centos/root LV Name root VG Name centos LV UUID lD64zY-yc3Z-SZaB-dAjK-03YM-2gM8-pfj4oo LV Write Access read/write LV Creation host, time localhost, 2016-10-26 17:23:48 +0800 LV Status available # open 1 LV Size 50.00 GiB Current LE 12800 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0
2.減少/home分區空間
# 釋放 /dev/centos/home 分區 300G 的空間 # 命令設置 /dev/centos/home 分區 200G空間 $ lvreduce -L 200G /dev/centos/home WARNING: Reducing active logical volume to 200.00 GiB. THIS MAY DESTROY YOUR DATA (filesystem etc.) Do you really want to reduce centos/home? [y/n]: y Size of logical volume centos/home changed from 475.70 GiB (121778 extents) to 200.00 GiB (51200 extents). Logical volume centos/home successfully resized.
3.增加/root分區空間
$ lvextend -l +100%FREE /dev/centos/root Size of logical volume centos/root changed from 50.06 GiB (12816 extents) to 325.76 GiB (83394 extents). Logical volume centos/root successfully resized.
4.擴展XFS文件空間大小
$ xfs_growfs /dev/mapper/centos-root
meta-data=/dev/mapper/centos-root isize=256 agcount=4, agsize=3276800 blks
= sectsz=512 attr=2, projid32bit=1
= crc=0 finobt=0 spinodes=0
data = bsize=4096 blocks=13107200, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=0
log =internal bsize=4096 blocks=6400, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
data blocks changed from 13107200 to 85395456
完成
以上就是本文的全部?jī)?nèi)容,希望對大家的學習有所幫助,也希望大家多多支持腳本之家。
- XenServer 虛擬機擴容LVM磁盤分區的方法
- linux大于2T的磁盤使用GPT分區的方法分享
- linux下查看swap分區被哪些進程占用實現腳本
- linux文件系統調整大小的方法(linux調整分區大小)
- Linux下掛載硬盤分區的幾種方法
- Linux 自動分區、格式化、掛載腳本詳解
- 詳解Centos/Linux下調整分區大小(以home和根分區為例)
- 如何解決Linux系統下Docker占滿分區的問題
- 詳解Linux 虛擬機根分區磁盤擴充空間記錄
- Linux中對lvm邏輯卷分區大小的調整教程(針對xfs與ext4不同文件系統)
相關文章
詳解CentOS如何使用NTP同步時間服務器
在Linux系統中,時間同步對于各種應用是非常關鍵的,例如,系統日志和許多監控應用程序都需要在多個服務器之間保持時間同步,NTP協議是一種常見的協議,它使得您可以在系統之間同步時間,下面我們將詳細討論CentOS如何使用NTP同步時間服務器,需要的朋友可以參考下2023-11-11
Apache多虛擬主機多站點配置的兩種實現方案
本文介紹了在Apache服務器上配置多虛擬主機的兩種方案:基于IP地址的虛擬主機配置和基于域名的虛擬主機配置,詳細說明了每個方案的配置步驟,以實現在同一臺服務器上托管多個網站的目的,感興趣的可以了解一下2024-09-09
Apache日志管理和統計分析知識
Apache服務器具備強大的日志功能,管理員可以方便、準備、及時地了解服務器狀況;可以更好地防范黑客的攻擊2016-04-04
使用腳本實現故障時自動重啟Apache
這篇文章主要介紹了使用腳本實現故障時自動重啟Apache,需要的朋友可以參考下2014-12-12
centos 6.8命令行下使用pptpsetup進行pptp撥號的實現方法
centos 6.8 命令行下可使用pptpsetup進行pptp撥號,首先安裝ppp,pptp和pptp-setup三個包,使用pptpsetup進行連接,下面給大家介紹的非常詳細,感興趣的朋友一起看看吧2016-10-10
Apache Rewrite url重定向功能的簡單配置
Rewrite url重定向就是實現URL的跳轉和隱藏真實地址,基于Perl語言的正則表達式規范。平時幫助我們實現擬靜態,擬目錄,域名跳轉,防止盜鏈等2010-08-08

