package com.tgb.aop; 
public interface UserManager { 
 
  public String findUserById(int userId); 
} 
 
 
package com.tgb.aop; 
 
public class UserManagerImpl implements UserManager { 
 
  public String findUserById(int userId) { 
    System.out.println("---------UserManagerImpl.findUserById()--------"); 
    if (userId <= 0) { 
      throw new IllegalArgumentException("該用戶不存在!");  
    } 
    return "張三"; 
  } 
}

package com.tgb.aop; 
import org.aspectj.lang.JoinPoint; 
import org.aspectj.lang.ProceedingJoinPoint; 
 /** 
 * Advice通知類 
 * 測試after,before,around,throwing,returning Advice. 
 * @author Admin 
 * 
 */ 
public class XMLAdvice { 
 
  /** 
   * 在核心業務執行前執行，不能阻止核心業務的調用。 
   * @param joinPoint 
   */ 
  private void doBefore(JoinPoint joinPoint) { 
    System.out.println("-----doBefore().invoke-----"); 
    System.out.println(" 此處意在執行核心業務邏輯前，做一些安全性的判斷等等"); 
    System.out.println(" 可通過joinPoint來獲取所需要的內容"); 
    System.out.println("-----End of doBefore()------"); 
  } 
   
  /** 
   * 手動控制調用核心業務邏輯，以及調用前和調用后的處理, 
   * 
   * 注意：當核心業務拋異常后，立即退出，轉向After Advice 
   * 執行完畢After Advice，再轉到Throwing Advice 
   * @param pjp 
   * @return 
   * @throws Throwable 
   */ 
  private Object doAround(ProceedingJoinPoint pjp) throws Throwable { 
    System.out.println("-----doAround().invoke-----"); 
    System.out.println(" 此處可以做類似于Before Advice的事情"); 
     
    //調用核心邏輯 
    Object retVal = pjp.proceed(); 
     
    System.out.println(" 此處可以做類似于After Advice的事情"); 
    System.out.println("-----End of doAround()------"); 
    return retVal; 
  } 
 
  /** 
   * 核心業務邏輯退出后（包括正常執行結束和異常退出），執行此Advice 
   * @param joinPoint 
   */ 
  private void doAfter(JoinPoint joinPoint) { 
    System.out.println("-----doAfter().invoke-----"); 
    System.out.println(" 此處意在執行核心業務邏輯之后，做一些日志記錄操作等等"); 
    System.out.println(" 可通過joinPoint來獲取所需要的內容"); 
    System.out.println("-----End of doAfter()------"); 
  } 
   
  /** 
   * 核心業務邏輯調用正常退出后，不管是否有返回值，正常退出后，均執行此Advice 
   * @param joinPoint 
   */ 
  private void doReturn(JoinPoint joinPoint) { 
    System.out.println("-----doReturn().invoke-----"); 
    System.out.println(" 此處可以對返回值做進一步處理"); 
    System.out.println(" 可通過joinPoint來獲取所需要的內容"); 
    System.out.println("-----End of doReturn()------"); 
  } 
   
  /** 
   * 核心業務邏輯調用異常退出后，執行此Advice，處理錯誤信息 
   * @param joinPoint 
   * @param ex 
   */ 
  private void doThrowing(JoinPoint joinPoint,Throwable ex) { 
    System.out.println("-----doThrowing().invoke-----"); 
    System.out.println(" 錯誤信息："+ex.getMessage()); 
    System.out.println(" 此處意在執行核心業務邏輯出錯時，捕獲異常，并可做一些日志記錄操作等等"); 
    System.out.println(" 可通過joinPoint來獲取所需要的內容"); 
    System.out.println("-----End of doThrowing()------"); 
  } 
} 

<?xml version="1.0" encoding="UTF-8"?>  
<beans xmlns="http://www.springframework.org/schema/beans" 
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
     xmlns:aop="http://www.springframework.org/schema/aop" 
     xmlns:tx="http://www.springframework.org/schema/tx" 
     xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-2.0.xsd 
      http://www.springframework.org/schema/aop http://www.springframework.org/schema/aop/spring-aop-2.0.xsd 
      http://www.springframework.org/schema/tx http://www.springframework.org/schema/tx/spring-tx-2.0.xsd"> 
        
   
  <bean id="userManager" class="com.tgb.aop.UserManagerImpl"/> 
   
  <!--<bean id="aspcejHandler" class="com.tgb.aop.AspceJAdvice"/>--> 
  <bean id="xmlHandler" class="com.tgb.aop.XMLAdvice" /> 
  <aop:config> 
    <aop:aspect id="aspect" ref="xmlHandler"> 
      <aop:pointcut id="pointUserMgr" expression="execution(* com.tgb.aop.*.find*(..))"/>        
      <aop:before method="doBefore" pointcut-ref="pointUserMgr"/> 
      <aop:after method="doAfter" pointcut-ref="pointUserMgr"/> 
      <aop:around method="doAround" pointcut-ref="pointUserMgr"/> 
      <aop:after-returning method="doReturn" pointcut-ref="pointUserMgr"/> 
      <aop:after-throwing method="doThrowing" throwing="ex" pointcut-ref="pointUserMgr"/>        
    </aop:aspect> 
  </aop:config> 
</beans> 

package com.tgb.aop;  
import org.springframework.beans.factory.BeanFactory; 
import org.springframework.context.support.ClassPathXmlApplicationContext; 
 
public class Client { 
 
  public static void main(String[] args) { 
    BeanFactory factory = new ClassPathXmlApplicationContext("applicationContext.xml"); 
    UserManager userManager = (UserManager)factory.getBean("userManager"); 
     
    //可以查找張三 
    userManager.findUserById(1); 
     
    System.out.println("=====我==是==分==割==線====="); 
 
    try { 
      // 查不到數據，會拋異常，異常會被AfterThrowingAdvice捕獲 
      userManager.findUserById(0); 
    } catch (IllegalArgumentException e) { 
    } 
  } 
}