PHP全功能無變形圖片裁剪操作類與用法示例
本文實例講述了PHP全功能無變形圖片裁剪操作類與用法。分享給大家供大家參考,具體如下:
如果需要圖片裁剪,或生成縮略圖,這個基本上沒有問題,全部需要的功能都在里面,全部都是無變形的。
這里我們劃分為四種模式:
1. 任意圖片裁剪到指定大小,超過的,劇中裁剪,并且最大化縮放,不夠的拉伸,
2. 超過的劇中裁剪,而不足的,不拉伸,即只縮小,不放大裁剪,會產生補白,可以用png透明度來消除
3. 保留全部圖片信息。不裁剪,只縮放,不足的補白。
4. 保留全部圖片信息。不裁剪,只縮放,不足的不補白,產生的圖片為實際有效像素大小,例如有個圖片是600X600 現在要生成 120X100 那么縮放后的實際有效像素為100X100,所以只生成100X100的圖片,而第三種模式則生成120X100的大小,并且有補白
代碼如下(此處代碼通過本站在線工具http://tools.jb51.net/code/jb51_php_format做了格式化處理):
<?php
/**
* Author : smallchicken
* mode 1 : 強制裁剪,生成圖片嚴格按照需要,不足放大,超過裁剪,圖片始終鋪滿
* mode 2 : 和1類似,但不足的時候 不放大 會產生補白,可以用png消除。
* mode 3 : 只縮放,不裁剪,保留全部圖片信息,會產生補白,
* mode 4 : 只縮放,不裁剪,保留全部圖片信息,生成圖片大小為最終縮放后的圖片有效信息的實際大小,不產生補白
* 默認補白為白色,如果要使補白成透明像素,請使用SaveAlpha()方法代替SaveImage()方法
*
* 調用方法:
*
* $ic=new ImageCrop('old.jpg','afterCrop.jpg');
* $ic->Crop(120,80,2);
* $ic->SaveImage();
* //$ic->SaveAlpha();將補白變成透明像素保存
* $ic->destory();
*
*
*/
class ImageCrop {
var $sImage;
var $dImage;
var $src_file;
var $dst_file;
var $src_width;
var $src_height;
var $src_ext;
var $src_type;
function ImageCrop($src_file,$dst_file='') {
$this->src_file=$src_file;
$this->dst_file=$dst_file;
$this->LoadImage();
}
function SetSrcFile($src_file) {
$this->src_file=$src_file;
}
function SetDstFile($dst_file) {
$this->dst_file=$dst_file;
}
function LoadImage() {
list($this->src_width, $this->src_height, $this->src_type) = getimagesize($this->src_file);
switch($this->src_type) {
case IMAGETYPE_JPEG :
$this->sImage=imagecreatefromjpeg($this->src_file);
$this->ext='jpg';
break;
case IMAGETYPE_PNG :
$this->sImage=imagecreatefrompng($this->src_file);
$this->ext='png';
break;
case IMAGETYPE_GIF :
$this->sImage=imagecreatefromgif($this->src_file);
$this->ext='gif';
break;
default:
exit();
}
}
function SaveImage($fileName='') {
$this->dst_file=$fileName ? $fileName : $this->dst_file;
switch($this->src_type) {
case IMAGETYPE_JPEG :
imagejpeg($this->dImage,$this->dst_file,100);
break;
case IMAGETYPE_PNG :
imagepng($this->dImage,$this->dst_file);
break;
case IMAGETYPE_GIF :
imagegif($this->dImage,$this->dst_file);
break;
default:
break;
}
}
function OutImage() {
switch($this->src_type) {
case IMAGETYPE_JPEG :
header('Content-type: image/jpeg');
imagejpeg($this->dImage);
break;
case IMAGETYPE_PNG :
header('Content-type: image/png');
imagepng($this->dImage);
break;
case IMAGETYPE_GIF :
header('Content-type: image/gif');
imagegif($this->dImage);
break;
default:
break;
}
}
function SaveAlpha($fileName='') {
$this->dst_file=$fileName ? $fileName . '.png' : $this->dst_file .'.png';
imagesavealpha($this->dImage, true);
imagepng($this->dImage,$this->dst_file);
}
function OutAlpha() {
imagesavealpha($this->dImage, true);
header('Content-type: image/png');
imagepng($this->dImage);
}
function destory() {
imagedestroy($this->sImage);
imagedestroy($this->dImage);
}
function Crop($dst_width,$dst_height,$mode=1,$dst_file='') {
if($dst_file) $this->dst_file=$dst_file;
$this->dImage = imagecreatetruecolor($dst_width,$dst_height);
$bg = imagecolorallocatealpha($this->dImage,255,255,255,127);
imagefill($this->dImage, 0, 0, $bg);
imagecolortransparent($this->dImage,$bg);
$ratio_w=1.0 * $dst_width / $this->src_width;
$ratio_h=1.0 * $dst_height / $this->src_height;
$ratio=1.0;
switch($mode) {
case 1: // always crop
if( ($ratio_w < 1 && $ratio_h < 1) || ($ratio_w > 1 && $ratio_h > 1)) {
$ratio = $ratio_w < $ratio_h ? $ratio_h : $ratio_w;
$tmp_w = (int)($dst_width / $ratio);
$tmp_h = (int)($dst_height / $ratio);
$tmp_img=imagecreatetruecolor($tmp_w , $tmp_h);
$src_x = (int) (($this->src_width-$tmp_w)/2) ;
$src_y = (int) (($this->src_height-$tmp_h)/2) ;
imagecopy($tmp_img, $this->sImage, 0,0,$src_x,$src_y,$tmp_w,$tmp_h);
imagecopyresampled($this->dImage,$tmp_img,0,0,0,0,$dst_width,$dst_height,$tmp_w,$tmp_h);
imagedestroy($tmp_img);
} else {
$ratio = $ratio_w < $ratio_h ? $ratio_h : $ratio_w;
$tmp_w = (int)($this->src_width * $ratio);
$tmp_h = (int)($this->src_height * $ratio);
$tmp_img=imagecreatetruecolor($tmp_w ,$tmp_h);
imagecopyresampled($tmp_img,$this->sImage,0,0,0,0,$tmp_w,$tmp_h,$this->src_width,$this->src_height);
$src_x = (int)($tmp_w - $dst_width) / 2 ;
$src_y = (int)($tmp_h - $dst_height) / 2 ;
imagecopy($this->dImage, $tmp_img, 0,0,$src_x,$src_y,$dst_width,$dst_height);
imagedestroy($tmp_img);
}
break;
case 2: // only small
if($ratio_w < 1 && $ratio_h < 1) {
$ratio = $ratio_w < $ratio_h ? $ratio_h : $ratio_w;
$tmp_w = (int)($dst_width / $ratio);
$tmp_h = (int)($dst_height / $ratio);
$tmp_img=imagecreatetruecolor($tmp_w , $tmp_h);
$src_x = (int) ($this->src_width-$tmp_w)/2 ;
$src_y = (int) ($this->src_height-$tmp_h)/2 ;
imagecopy($tmp_img, $this->sImage, 0,0,$src_x,$src_y,$tmp_w,$tmp_h);
imagecopyresampled($this->dImage,$tmp_img,0,0,0,0,$dst_width,$dst_height,$tmp_w,$tmp_h);
imagedestroy($tmp_img);
} elseif($ratio_w > 1 && $ratio_h > 1) {
$dst_x = (int) abs($dst_width - $this->src_width) / 2 ;
$dst_y = (int) abs($dst_height -$this->src_height) / 2;
imagecopy($this->dImage, $this->sImage,$dst_x,$dst_y,0,0,$this->src_width,$this->src_height);
} else {
$src_x=0;
$dst_x=0;
$src_y=0;
$dst_y=0;
if(($dst_width - $this->src_width) < 0) {
$src_x = (int) ($this->src_width - $dst_width)/2;
$dst_x =0;
} else {
$src_x =0;
$dst_x = (int) ($dst_width - $this->src_width)/2;
}
if( ($dst_height -$this->src_height) < 0) {
$src_y = (int) ($this->src_height - $dst_height)/2;
$dst_y = 0;
} else {
$src_y = 0;
$dst_y = (int) ($dst_height - $this->src_height)/2;
}
imagecopy($this->dImage, $this->sImage,$dst_x,$dst_y,$src_x,$src_y,$this->src_width,$this->src_height);
}
break;
case 3: // keep all image size and create need size
if($ratio_w > 1 && $ratio_h > 1) {
$dst_x = (int)(abs($dst_width - $this->src_width )/2) ;
$dst_y = (int)(abs($dst_height- $this->src_height)/2) ;
imagecopy($this->dImage, $this->sImage, $dst_x,$dst_y,0,0,$this->src_width,$this->src_height);
} else {
$ratio = $ratio_w > $ratio_h ? $ratio_h : $ratio_w;
$tmp_w = (int)($this->src_width * $ratio);
$tmp_h = (int)($this->src_height * $ratio);
$tmp_img=imagecreatetruecolor($tmp_w ,$tmp_h);
imagecopyresampled($tmp_img,$this->sImage,0,0,0,0,$tmp_w,$tmp_h,$this->src_width,$this->src_height);
$dst_x = (int)(abs($tmp_w -$dst_width )/2) ;
$dst_y = (int)(abs($tmp_h -$dst_height)/2) ;
imagecopy($this->dImage, $tmp_img, $dst_x,$dst_y,0,0,$tmp_w,$tmp_h);
imagedestroy($tmp_img);
}
break;
case 4: // keep all image but create actually size
if($ratio_w > 1 && $ratio_h > 1) {
$this->dImage = imagecreatetruecolor($this->src_width,$this->src_height);
imagecopy($this->dImage, $this->sImage,0,0,0,0,$this->src_width,$this->src_height);
} else {
$ratio = $ratio_w > $ratio_h ? $ratio_h : $ratio_w;
$tmp_w = (int)($this->src_width * $ratio);
$tmp_h = (int)($this->src_height * $ratio);
$this->dImage = imagecreatetruecolor($tmp_w ,$tmp_h);
imagecopyresampled($this->dImage,$this->sImage,0,0,0,0,$tmp_w,$tmp_h,$this->src_width,$this->src_height);
}
break;
}
}
// end Crop
}
?>
PS:這里再為大家推薦幾款比較實用的圖片處理工具供大家參考使用:
在線圖片轉換BASE64工具:
http://tools.jb51.net/transcoding/img2base64
ICO圖標在線生成工具:
http://tools.jb51.net/aideddesign/ico_img
在線Email郵箱圖標制作工具:
http://tools.jb51.net/email/emaillogo
在線圖片格式轉換(jpg/bmp/gif/png)工具:
http://tools.jb51.net/aideddesign/picext
更多關于PHP相關內容感興趣的讀者可查看本站專題:《PHP圖形與圖片操作技巧匯總》、《PHP基本語法入門教程》、《PHP運算與運算符用法總結》、《php面向?qū)ο蟪绦蛟O(shè)計入門教程》、《PHP網絡編程技巧總結》、《PHP數組(Array)操作技巧大全》、《php字符串(string)用法總結》、《php+mysql數據庫操作入門教程》及《php常見數據庫操作技巧匯總》
希望本文所述對大家PHP程序設計有所幫助。
相關文章
PHP實現動態獲取函數參數的方法示例
這篇文章主要介紹了PHP實現動態獲取函數參數的方法,結合實例形式分析了php針對函數參數操作func_num_args()、func_get_arg()及func_get_args()函數相關使用技巧,需要的朋友可以參考下2018-04-04
php獲取ip的三個屬性區別介紹(HTTP_X_FORWARDED_FOR,HTTP_VIA,REMOTE_ADDR)
獲取用戶IP地址的三個屬性的區別HTTP_X_FORWARDED_FOR,HTTP_VIA,REMOTE_ADDR,需要的朋友可以參考下2012-09-09
php獲取網卡的MAC地址支持WIN/LINUX系統
這篇文章主要介紹了使用php獲取網卡的MAC地址支持WIN/LINUX系統,需要的朋友可以參考下2014-04-04
PHP獲取用戶的瀏覽器與操作系統信息的代碼
PHP為了準確獲得訪問用戶的瀏覽器 操作系統信息,以便返回給不同的用戶不同的需求,比如不同的IE用戶,分別加載不同的CSS文件2012-09-09
php+mysql+jquery實現簡易的檢索自動補全提示功能
這篇文章主要介紹了php+mysql+jquery實現簡易的檢索自動補全提示功能,涉及基于jQuery的ajax數據庫查詢與事件動態響應相關操作技巧,需要的朋友可以參考下2017-04-04
PHP與MySQL開發中頁面亂碼的產生與解決
一般來說,亂碼的出現有2種原因,首先是由于編碼(charset)設置錯誤,導致瀏覽器以錯誤的編碼來解析,從而出現了滿屏亂七八糟的“天書”,其次是文件被以錯誤的編碼打開,然后保存,比如一個文本文件原先是GB2312編碼的,卻以UTF-8編碼打開再保存。要解決上述亂碼問題,首先需要知道開發中哪些環節涉及到了編碼:2008-03-03
php的優點總結 php有哪些優點
在本篇文章里小編給各位整理了關于php的優點的總結內容以及相關知識點整理,需要的朋友們學習下。2019-07-07

